By Fix-It Club
Flush doors -- those with smooth, flat surfaces -- are easy to paint with either a brush or a roller, but doors with inset panels can be tricky. No matter what type of door you're dealing with, paint the entire door without stopping. Otherwise the lap marks may show. Before you start, remove the doorknobs, the plates behind them, and the latch plate on the edge of the door.
On ornate doors, start by painting the inset panels at the top of the door. As with wainscoting, paint all the panels and the molding around them. Then work your way down from the top to the bottom, painting the top rail, middle rail, and bottom rail (the horizontals) with back-and-forth strokes.
Next, paint the vertical stiles (the sides) with up-and-down strokes. If you're painting both sides of the door, repeat this procedure. If you're painting only one side, paint the top edge of the door with a light coat. Over time, paint can build up on the top edge and cause the door to stick. Finally, paint the door's hinge edge and latch edge.
Not what you're looking for? Try these helpful articles:
- House Painting: Ready to tackle a house painting project? Gather helpful tips on both interior and exterior painting in this home improvement article.
- House Painting Tools: Before taking on any painting project, make sure you have the tools you'll need to do the job well. This article will help.
- Painting Interiors: Learn the essentials of painting walls, doors, and everything inside the house on this page.
- Painting Windows: Find tips on painting various types of window frames in this article, only at HowStuffWorks.